INPUTS |
| P2: |
2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) |
| P5: |
5 Single-Ended, 5 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) |
POWER OUTPUT (Per channel, continuous RMS, 20 Hz to 20 kHz,
<0.1% THD, one or all channels driven.) |
| Impedance | 8 Ω |
4 Ω |
2 Ω |
| # of
Channels Driven | 1 | All | 1 | All |
1 | All |
| P2, P5 |
325 W |
325 W |
500 W |
500 W |
675 W |
675 W |
| Statement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output |
SWITCHES |
| Front Panel: |
Power (On/Off) |
| Rear Panel: |
On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) |
THD+N: |
0.0007% at 1 kHz, 0.008% at 20 kHz |
IMD: |
0.00019% (CCIF, 325 W into 8 Ω) |
POWER BANDWIDTH: |
10 Hz to 150 kHz
(+0 -3 dB, 325 W into 8 Ω) |
FREQUENCY RESPONSE: |
20 Hz to 20 kHz (+0 -0.15 dB),
5 Hz to 100 kHz (+0 -2 dB) |
INPUT SENSITIVITY: |
1 Vrms in for 28.3 Vrms out
(100 W into 8 Ω) |
INPUT IMPEDANCE: |
18 kΩ (RCA), 22 kΩ (XLR) |
DAMPING FACTOR: |
>600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) |
S/N RATIO: |
125 dB, A-weighted (ref. 325 W) |
CROSSTALK: |
-140 dB (20 Hz), -80 dB (20 kHz) |
VOLTAGE GAIN: |
29 dB |
SLEW RATE: |
40 V/µs |
POWER REQUIREMENTS |
| SUPPLY VOLTAGE: |
105 to 130 V, 60 Hz |
| POWER CONSUMPTION P2: |
1800W |
| POWER CONSUMPTION P5: |
2 x 1800W |
DIMENSIONS |
| Height: |
9-3/8 inches (23.8 cm) including feet |
| Width: |
Faceplate 19-1/4 inches (49 cm)
Chassis 17-1/4 inches (43.8 cm) |
| Depth: |
22-1/2 inches (57.2 cm) including handles |
WEIGHT (unpacked) |
| P2: |
75 lb (34 kg) |
| P5: |
130 lb (59 kg) |