| POWER OUTPUT: |
110 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.3% at 110 watts, below 0.03% at 1 watt.
Approximate actual power available at "clipping" 120 watts (1kHz). (Note that actual power output is dependent upon both line voltage and "condition" i.e.: if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.) |
| FREQUENCY RESPONSE: |
( -3dB at 1 watt) 0.6Hz to 90kHz. |
| INPUT SENSITIVITY: |
1.8V RMS BAL for rated output. (24dB Bal gain into 8 ohms.) |
| INPUT IMPEDANCE: |
300K ohms Balanced. |
| OUTPUT POLARITY: |
Non-inverting. Balanced input pin 2+ (IEC-268). |
| OUTPUT TAPS: |
16 ohms, 8 ohms, 4 ohms. |
| OUTPUT REGULATION: |
Approximately 0.7dB 16 ohm load to open circuit (Damping factor approximately 12). |
| HUM & NOISE: |
Less than 0.2mV RMS
-106dB below rated output (IHF weighted, input shorted). |
| POWER SUPPLY ENERGY STORAGE: |
Approximately 520 joules. |
| POWER REQUIREMENTS: |
105-125VAC 60Hz (210-250VAC 50 Hz) 630 watts at rated output, 800 watts maximum, 410 watts at "idle." |
| TUBES REQUIRED: |
4 - Matched pair 6550C - Power Output; 4 - 6H30 Driver. |
| DIMENSIONS: |
19" (48.3 cm) W x 8.75"(22.2 cm) H x 19.5"(49.5 cm) D. Handles extend 1.5" (3.8 cm) forward. |
| WEIGHT: |
67.4 lbs. (30.7 kg) Net; 83 lbs. (37.8 kg) Shipping. |